Follow

GPS+Track

Opting to play in GPS+Track mode provides you with the distances for the front, middle and back of the green and engages the performance tracking function of your V2. The yardages you are shown are smart yardages, meaning that the points are based on the angle of the player to the green rather than basing the distances on fixed points. The “Track” aspect of this mode means that all of your data will be collected in the background. You will also be prompted to use PinCollect after you complete each hole.

Setting up for GPS+Track

When GPS+Track mode is selected, the watch begins to prepare your round by establishing your location and linking this with your pre-downloaded golf course. This should only take a few moments, if you need help downloading courses, please follow this link for more information.

Once GPS has been established, you will then be asked to select the course you are playing from a list. Courses will be ordered from the nearest course to your location to the furthest away course. The course highlighted in bold is the currently selected course. To scroll between options, use the top right button to move up the list and the bottom right bottom to move down the list. When the correct course is highlighted, press the top left button to select this.

After selecting a course, you will be asked to confirm that this is the correct course. Confirm this by pressing the bottom right button which will take you on to the GPS Yardage screen. If the course shown isn’t correct, press the bottom right button which will return you to the course selector.

2.1.2-CourseList.gif

Course not found

If the course you are looking for isn’t on this list select “Course not shown”, which will allow you to return to the homepage by pressing the bottom left button. From here you can reattempt to locate the course. If the problem persists, please contact support@shotscope.com.

Getting started in GPS+Track mode

Upon selecting this mode, the distances for the first green will appear on your screen. The bottom of the screen will display the hole number and the par for that hole.

If you wish to change the hole number then you can advance to the next hole by pressing the bottom right button and go back to a previous hole by pressing the bottom left button. This will then update the hole and change the yardage distances to show for the new green.

The yardages on the screen will automatically update as you walk around the course.

2.1.1_ydsScreen.jpg

Using PinCollect

To provide accurate proximity to the hole and putting statistics we ask that you press a button to locate the pin for us, by pressing a button with the watch over the hole we can accurately establish where the pin was located for that round.

We do ask that you press the number button that corresponds to the amount of times you used your putter on that hole (on or off the green).

PinCollect will automatically appear on your screen when you walk onto the green. After you leave the green you will have 45 seconds until the PinCollect screen will disappear. If you walk back onto the green during or after the countdown period, the PinCollect screen will appear again.

To signify zero putts, press the top left button; for one putt, press the bottom left button; two putts, press the top right button; three putts, press the bottom right button and for four putts press the mode button followed by the top left button.

Once this has been successfully recorded you will see the PinCollect Recorded Screen. The screen will show for 5 seconds before returning to the yardage screen.

2.3.1_PinCollectScreen.jpg

Lost GPS Signal

If the watch loses GPS signal during the round you will be notified on the screen.

The watch will automatically start to search for GPS in this scenario and, if this happens, you can simply wait for it to do so and the screen will return to yardages.

If you want to end the round at this point press the bottom right button. This will return the watch to the home screen.

2.2.2_LostGPS.jpg

Ending your round

To complete your round, press the mode button three times. You will be asked to confirm that you wish to end your round, do this by pressing the bottom left button which will then advance you to a summary of your round. If you have pressed this in error and do not wish to end your round, press the mode button to return to the yardages.

2.2.3_EndRound.jpg 

Round summary

The ending of your round will be confirmed by the displaying of your round summary which displays the length of time the round took to complete. From here, press the bottom left button to return to the home screen or the bottom right button to proceed to the sync screen.

2.2.5_RoundSumSync.jpg

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

0 Comments

Article is closed for comments.