The following article will explain what to do if your watch shows as 'Connected' but your app shows as 'Not Connected'. This applies to the V2 only, V3 and G3 are not compatible with the Shot Scope desktop app.
If you can't get the watch to connect to the desktop app, please try the following:
1) Try another USB cable. The cable must be able to transfer data so cables used for cameras/phones etc are suitable. If a different cable does work then the original cable will most likely have developed a fault and we will happily replace this if you contact us at support@shotscope.com.
2) Try a different USB port on your computer. Make sure there is no dirt or fluff in your USB ports.
3) If you have a Windows 7 or 8 computer there is a known issue with the watch's drivers being automatically installed. Click here to get instructions on how to manually install the watch's drivers. This may allow the watch to connect.
4) Try connecting your watch to another computer if possible, this will help clear up if its an issue with the watch or the original computer/app.
If none of these help then please get in touch with the support team by contacting us at support@shotscope.com.
Comments
0 comments
Please sign in to leave a comment.